Application List

Application List

  • Clear DTC Code(s)
  • Diagnostic Investigation Work (30 Mins Max)
  • Immobilizer Module Programming after Replacement
  • ECM Programming after Replacement
  • Lost/Spare Key Programming
  • Lost/Spare SMART Key Programming
  • Re-Align Immobilizer after battery failure (Keyed Ignition)
  • Re-Align Immobilizer after battery failure (Push to Start Keyless)
  • Steering Angle Sensor Adaptation

  • ABS Module Coding
  • Adaptive Cruise Control Module Coding
  • Airbag Control Module Programming
  • Clear Crash Data in Airbag Module
  • Clear DTC Code(s)
  • Diagnostic Investigation (30 Mins Max)
  • Door Control Module Programming
  • DPF Replacement Adaptation
  • ECM Software Update
  • Emergency Call Module Programming
  • Front Radar Calibration
  • Gateway Module Coding
  • Gearbox Module Coding
  • Headlight Module Configuration
  • Immobilizer Align in Used ECM
  • Infotainment System Programming
  • Lane Assist Module Programming
  • Lost/Spare Key Programming
  • Lost/Spare SMART Key Programming
  • New Central Electrics Module (BCM) Coding
  • New Instrument Cluster Programming
  • New Key Set (Lockset) Programming
  • New Suspension Control Unit Programming
  • Parking Distance Control Module Configuration
  • Power Steering Module Configuration
  • Radio Code Retrieval
  • Steering Angle Sensor Adaptation
  • Steering Column Electrics Programming
  • SVM Activation of New NAV SD Card
  • Tow Bar Configuration (OEM Registration)
  • Turbo Actuator Reset

  • Clear DTC Code(s)
  • Diagnostic Investigation Work (30 Mins Max)
  • Immobilizer Module Programming after Replacement
  • ECM Programming after Replacement
  • Lost/Spare Key Programming
  • Lost/Spare SMART Key Programming
  • Re-Align Immobilizer after battery failure (Keyed Ignition)
  • Re-Align Immobilizer after battery failure (Push to Start Keyless)
  • Steering Angle Sensor Adaptation

  • Clear DTC Code(s)
  • Diagnostic Investigation Work (30 Mins Max)
  • Electronic Steering Lock Programming
  • Lost/Spare Key Programming
  • Lost/Spare Smart Key Programming
  • Night Vision System Coding

  • ABS Module Coding
  • Active Steering Module (ASA) Coding
  • Airbag Control Module Programming
  • All Round View Camera Module Programming
  • Auxiliary Battery Programming
  • BDC/BCM Software Update
  • Blind Spot Module Coding
  • Brake Service Mode Adaptation
  • Brake Wear Reset
  • Car Information Computer (CIC) Module Coding
  • CAS Module Firmware Downgrade
  • CAS Module Adaptation
  • CAS Module Software Update
  • Clear DTC Code(s)
  • Diagnostic Investigation Work (30 Mins Max)
  • Disable/Enable Lost/Stolen Remote Key
  • Dorr Window Module Coding
  • DPF Replacement Adaptation
  • DSC Module Calibration
  • DSC Module Coding
  • ECM Software Update
  • Electronic Power Steering Module Coding
  • Electronic Power Steering Module Software Update
  • Error Fix – 4A63 EWS Anti-Tampering Fault in DDE
  • FEM Module Coding (module must be VIN Ordered from Dealer)
  • FRM Coding
  • Front Radar Calibration
  • Front Rader Module (FRS) Coding
  • Gear Shift Module (GSM) Programming
  • Gearbox Module Coding
  • Gearbox Software Update & Adaptation
  • Headlight Module Configuration
  • HVAC Module Programming
  • Infotainment System Programming
  • Integrated Chassis Management Coding
  • Junction Box Electronics Programming
  • Junction Box Software Update
  • New ECM Programming
  • New Electric Fuel Pump Module Coding
  • New Instrument Cluster Programming
  • New Light Control Module Coding
  • New Suspension Control Unit Programming
  • New Suspension Strut Programming
  • Oil & Service Indicator Reset
  • Parking Brake Module Programming
  • Parking Brake Module Software Update
  • Parking Distance Control Module Software Update
  • Rear Electronics Module Coding
  • Rear Light Module Programming
  • Reset DPF Learn Values
  • Reset NOx Sensor
  • SCR Diagnostics
  • SCR Module Software Update
  • Spare Remote Key Programming (1 working key available)
  • Spare Smart Key Programming (1 working key available)
  • Steering Angle Sensor Adaptation
  • Steering Column Electronics Programming (SZL)
  • Storage Management Electronics (SME) Software Update
  • Tailgate Module Coding
  • Telematics Module Coding
  • Tow Bar Configuration
  • Transfer Box (VTG) Module Coding
  • Transfer Box Oil Reset
  • Tire Pressure Module Programming
  • Upper Control Panel Module Coding
  • Used Gearbox (EGR) Module Programming
  • Used Gearbox (EGR) Module Reset
  • Vehicle Battery Coding
  • Vertical Dynamics Management (ICMV) Module Coding

  • Airbag Control Module Programming
  • Clear DTC Code(s)
  • Diagnostic Investigation Work (30 Mins Max)
  • ECM Software Update
  • Hybrid Powertrain Software Update
  • TCM Coding and Programming
  • Lost / Spare Ignition Key Programming
  • Lost / Spare Smart Key Programming
  • New BCM Programming
  • New ECM Programming
  • New Immobilizer Module Coding (2 Keys Required)
  • New Instrument Cluster Programming
  • Unlock Security in Used Radio
  • Service Indicator Reset
  • ABS Software Update
  • Airbag Control Module Programming
  • BCM Software Update
  • BCM Replacement Programming (New Dealer Part)
  • Electronic Power Steering Module Coding
  • Front Radar Calibration (Reflector Board must be set up before
  • connecting)
  • New BCM Alignment
  • New Convergence Module Programming
  • New Instrument Cluster Programming
  • Clear DTC Code(s)
  • Diagnostic Investigation Work (30 Mins Max)
  • ECM Software Update
  • New Electronic Steering Switch (WIN Module) Coding
  • HVAC Software Update
  • Lost / Spare Key Programming
  • Lost / Spare SMART Key Programming
  • Lane Assist Module Calibration (ADAS Calibration boards must be
  • set up before connecting)
  • New PCM Programming
  • Used PCM Programming
  • Neutral Position Sensor Programming
  • Proxy Alignment Procedure
  • Service Indicator Reset
  • Steering Angle Sensor Adaptation
  • Transponder Key Pre-Coding & Preparation
  • TCM Software Update
  • TCM Coding and Programming

GENERAL FUNCTIONS

  • Diagnostic Investigation Work (30 Mins Max)
  • Clear DTC Code(s)
  • Lost/Spare Key Programming
  • Lost/Spare Smart Key Programming
  • ABS Module Configuration
  • Airbag Control Module Programming
  • Parameter Reset
  • Customer Spare Key Programming Enable
  • Customer Spart Key Programming Disable
  • Unlimited Key Mode ON
  • Unlimited Key Mode OFF
  • Program Unlimited Key Code
ACM: Audio Front Control Module
  • ACM Module Programming
  • ACM Module Configuration

APIM: SYNC Module

  • SYNC Module Coding / Programming
  • SYNC Module Configuration
  • Reset SYNC Module

      AWD: All-Wheel Drive Module:

  • Program NEW AWD Module
  • AWD – Active Torque Coupling Configuration
  • AWD: Relearn Vehicle Data
  • AWD: Reset Keep Alive Memory (KAM)

ABS: Anti-Lock Brake System

  • ABS Module Coding
  • ABS Module Configuration
  • Brake Pressure Bleeding
  • ABS Sensor Calibration
  • ABS Module Bleed Configuration
  • Hydraulic Control Unit (HCU) Coil Solenoid Calibration
  • Electronic Parking Brake Initialization

PCM: Powertrain Control Module

  • New PCM Programming 
  • Used PCM Programming
  • PATS Module Initialization (Parameter Reset)
  • PCM Configuration
  • PCM Reset (after battery disconnected)
  • Dealer Level Software Update
  • Reset the Keep Alive Memory (KAM)
  • Clear Transmission Adaptive Tables
  • CEI – Lock Configuration 

BCM: Body Control Module

  • BCM Programming (Smart Key System)
  • BCM to ESCL Training 
  • BCM Reset
  • BCM Configuration
  • Tire Pressure Monitoring System (TPMS) Initialization
  • Reset Battery Monitoring Sensor Learned Values
  • Local Interconnect Network (LIN) NEW Module Initialization
  • Factory Keyless Entry Code
  • Remote Keyless Entry (RKE) Keypad Programming

CCM: Cruise Control Module

  • New CCM Programming
  • CCM Configuration
  • Software Update
  • Cruise Control Radar Alignment
  •  

DDM: Driver Door Module 

  • Driver Door Control Module Programming
  • Driver Door Module Configuration

GWM: Gateway Module

  • Gateway Module (GWM) Programming 
  • Gateway Module A (GWM) Configuration 
  • Gateway Network Protection Unlock

HSWM: Heated Steering Wheel Module

  • Heated Steering Wheel Module Programming
  • Heated Steering Wheel Module Configuration

HVAC: Heating, Ventilation and Air Conditioning

  • HVAC Control Module Programming
  • HVAC Control Module Configuration
  • Reset the Outside Temperature Learned Values

IPMA: Image Processing Module A 

  • Image Processing Module A – Calibration
  • IMPA Coding
  • IMPA Software Update

IPMB: Image Processing Module B

  • Image Processing Module B– Coding

IPC: Instrument Panel Cluster

  • New Instrument Cluster (IPC) Programming
  • Instrument Panel Cluster Configuration

KEYS: LOST / SPARE KEY PROGRAMMING 

  • Lost Key Programming (Lost Key Lockout – Alarm is Active)
  • Lost Smart Key Programming (Lost Key Lockout – Alarm is Active)
  • Lost/Spare Key Programming
  • Lost /Spare Smart Key Programming
  • IMPA Coding
  • IMPA Software Update

PAM: Parking Assist Control Module

  • Parking Assist Control  Module Programming
  • Parking Assist Control Module Configuration
  • Tow Bar Configuration

PDM: Passenger Door Module

  • Passenger Door Module Programming
  • Passenger Door Module Configuration

PSCM: Power Steering Control Module

  • Power Steering Control Module Programming
  • Module Configuration
  • Electronic Steering Lock Programming

RCM: Restraints Control Module (Airbag Module)

  • New Module Programming
  • RCM Configuration
  • Clear RCM Crash Data

RGTM: Rear Gate Trunk Module

  • Rear Gate Trunk Module Programming
  • Module Configuration

RTM: Radio Transceiver Module

  • Radio Transceiver Module Programming
  • Module Configuration

SCCM: Steering Column Control Module

  • Steering Column Control Module Programming
  • Steering Column Control Module Configuration

SODL: Side Obstacle Detection Control Module LH 

  • SODL Module Programming
  • Module Configuration
  • Towbar Configuration

SODH: Side Obstacle Detection Control Module RH 

  • SODR Module Programming
  • Module Configuration
  • Towbar Configuration

  • Clear DTC Code(s)
  • Diagnostic Investigation Work (30 Mins Max)
  • Immobilizer Module Programming after Replacement
  • ECM Programming after Replacement
  • Lost/Spare Key Programming
  • Lost/Spare SMART Key Programming
  • Re-Align Immobilizer after battery failure (Keyed Ignition)
  • Re-Align Immobilizer after battery failure (Push to Start Keyless)
  • Steering Angle Sensor Adaptation
  • Airbag Control Module Programming
  • ABS Module Coding
  • Autonomous Emergency Brake (AEB) Coding
  • Clear DTC Code(s)
  • Diagnostic Investigation Work (30 Mins Max)
  • ECM Programming
  • Electronic Steering Lock Programming
  • Lost/Spare Transponder Key Programming(incl. remote if available)
  • Lost/Spare Smart Key Programming
  • New Instrument Cluster Programming
  • Power Steering Module Configuration
  • Service Indicator Reset
  • TPMS Module Programming
  • Throttle Body Adaptation
  • ABS Module Coding
  • Airbag Control Module Programming
  • BCM Configuration (after battery disconnected)
  • BCM Reset
  • New BCM Programming
  • Clear DTC Code(s)
  • Diagnostic Investigation Work (30 Mins Max)
  • ECM Software Update
  • ECM Programming
  • New Instrument Cluster Programming
  • Electronic Power Steering Module Coding
  • Electronic Steering Lock Programming
  • Lost/Spare Key Programming
  • Lost/Spare Smart Key Programming
  • Parking Brake Module Programming
  • TCM Software Update
  • New TCM Programming
  • TPMS Activation for Coding
  • Towbar Configuration

  • New Telematics Control Module Programming
  • Telematics Control Module Software Update
  • ABS Module Configuration
  • ABS Software Update
  • Air Suspension Service Adaptation
  • Air Suspension Calibration
  • Airbag Control Module Programming
  • All Terrain Module Programming
  • BCM Configuration
  • BCM Software Update
  • Blind Spot Module Coding (SODL/SODR)
  • Chassis Control Module B (CHCMB) Software Update
  • Clear DTC Code(s)
  • Clear Crash Data in BCM
  • Cruise Control Module (CCM) Programming
  • Cruise Control Module (CCM) Software Update
  • Door Control Module Programming
  • Electronic Steering Lock Programming
  • Gateway Module (GWM) Coding
  • Gateway Module Software Update
  • Headlight Module Configuration
  • HVAC Software Update
  • Headlight Module Configuration
  • Image Processing Module A (IPMA) Calibration
  • Image Processing Module A (IPMA) Coding
  • Image Processing Module A (IPMA) Software Update
  • Image Processing Module B (IPMB) Coding
  • Image Processing Module B (IPMB) Software Update
  • Impact Classification System Module Coding
  • Interactive Display Module (IDMA) Software Update
  • Instrument Cluster Software Update
  • Lost Key Programming
  • Spare Key Programming
  • Lost Smart Key Programming (Alarm NOT Active)
  • Lost Smart Key Programming (Alarm is Active)
  • Spare Smart Key Programming
  • Near Field Sensing Module (NFSM) Software Update
  • New BCM Programming
  • New Instrument Cluster Programming
  • Oil & Service Indicator Reset
  • Parking Assist Control Module Coding
  • Parking Brake Module Programming
  • PCM Programming
  • PCM Software Update
  • Power Steering Module Software Update
  • Rear Differential Module Coding
  • Reset DPF Learn Values
  • Reset SCR System after Non-Start Fault
  • RFA/KVM Module Coding
  • RFA/KVM Software Update
  • SCR & Nox Reset
  • SCR Diagnostics
  • Side Obstacle Detection System (SODS) Programming
  • Spare Smart Key with new KVM/RFA Programming
  • Steering Angle Sensor Adaptation
  • Tailgate Module Coding
  • Transmission Control Module Programming
  • Tow Bar Configuration
  • Telematics Module Coding
  • TPMS Module Programming
  • Vehicle Battery Coding

  • Airbag Control Module Programming
  • ABS Module Coding
  • Autonomous Emergency Brake (AEB) Coding
  • Clear DTC Code(s)
  • Diagnostic Investigation Work (30 Mins Max)
  • ECM Programming
  • Electronic Steering Lock Programming
  • Lost/Spare Transponder Key Programming(incl. remote if available)
  • Lost/Spare Smart Key Programming
  • New Instrument Cluster Programming
  • Power Steering Module Configuration
  • Service Indicator Reset
  • TPMS Module Programming
  • Throttle Body Adaptation

  • New Telematics Control Module Programming
  • Telematics Control Module Software Update
  • ABS Module Configuration
  • ABS Software Update
  • Air Suspension Service Adaptation
  • Air Suspension Calibration
  • Airbag Control Module Programming
  • All Terrain Module Programming
  • BCM Configuration
  • BCM Software Update
  • Blind Spot Module Coding (SODL/SODR)
  • Chassis Control Module B (CHCMB) Software Update
  • Clear DTC Code(s)
  • Clear Crash Data in BCM
  • Cruise Control Module (CCM) Programming
  • Cruise Control Module (CCM) Software Update
  • Door Control Module Programming
  • Electronic Steering Lock Programming
  • Gateway Module (GWM) Coding
  • Gateway Module Software Update
  • Headlight Module Configuration
  • HVAC Software Update
  • Headlight Module Configuration
  • Image Processing Module A (IPMA) Calibration
  • Image Processing Module A (IPMA) Coding
  • Image Processing Module A (IPMA) Software Update
  • Image Processing Module B (IPMB) Coding
  • Image Processing Module B (IPMB) Software Update
  • Impact Classification System Module Coding
  • Interactive Display Module (IDMA) Software Update
  • Instrument Cluster Software Update
  • Lost Key Programming
  • Spare Key Programming
  • Lost Smart Key Programming (Alarm NOT Active)
  • Lost Smart Key Programming (Alarm is Active)
  • Spare Smart Key Programming
  • Near Field Sensing Module (NFSM) Software Update
  • New BCM Programming
  • New Instrument Cluster Programming
  • Oil & Service Indicator Reset
  • Parking Assist Control Module Coding
  • Parking Brake Module Programming
  • PCM Programming
  • PCM Software Update
  • Power Steering Module Software Update
  • Rear Differential Module Coding
  • Reset DPF Learn Values
  • Reset SCR System after Non-Start Fault
  • RFA/KVM Module Coding
  • RFA/KVM Software Update
  • SCR & Nox Reset
  • SCR Diagnostics
  • Side Obstacle Detection System (SODS) Programming
  • Spare Smart Key with new KVM/RFA Programming
  • Steering Angle Sensor Adaptation
  • Tailgate Module Coding
  • Transmission Control Module Programming
  • Tow Bar Configuration
  • Telematics Module Coding
  • TPMS Module Programming
  • Vehicle Battery Coding

  • Clear DTC Codes(s)
  • Diagnostic Investigation Work (30 Mins Max)
  • Headlight Module Configuration
  • Power Steering Module Configuration
  • Lost/Spare Transponder Key Programming
  • Lost Smart Key Programming
  • Spare Smart Key Programming
  • Smart ID Box Replacement (NEW)
  • ECU Programming
  • ECU and Control Module Software Update
  • TPMS Sensor Programming

GENERAL FUNCTIONS

  • Diagnostic Investigation Work (30 Mins Max)
  • Clear DTC Code(s)
  • Lost/Spare Key Programming
  • Lost/Spare Smart Key Programming
  • ABS Module Configuration
  • Airbag Control Module Programming
  • Parameter Reset
  • Customer Spare Key Programming Enable
  • Customer Spart Key Programming Disable
  • Unlimited Key Mode ON
  • Unlimited Key Mode OFF
  • Program Unlimited Key Code
ACM: Audio Front Control Module
  • ACM Module Programming
  • ACM Module Configuration

 

APIM: SYNC Module

  • SYNC Module Coding / Programming
  • SYNC Module Configuration
  • Reset SYNC Module

      AWD: All-Wheel Drive Module:

  • Program NEW AWD Module
  • AWD – Active Torque Coupling Configuration
  • AWD: Relearn Vehicle Data
  • AWD: Reset Keep Alive Memory (KAM)

 

ABS: Anti-Lock Brake System

  • ABS Module Coding
  • ABS Module Configuration
  • Brake Pressure Bleeding
  • ABS Sensor Calibration
  • ABS Module Bleed Configuration
  • Hydraulic Control Unit (HCU) Coil Solenoid Calibration
  • Electronic Parking Brake Initialization

 

PCM: Powertrain Control Module

  • New PCM Programming 
  • Used PCM Programming
  • PATS Module Initialization (Parameter Reset)
  • PCM Configuration
  • PCM Reset (after battery disconnected)
  • Dealer Level Software Update
  • Reset the Keep Alive Memory (KAM)
  • Clear Transmission Adaptive Tables
  • CEI – Lock Configuration 

 

BCM: Body Control Module

  • BCM Programming (Smart Key System)
  • BCM Reset
  • BCM Configuration
  • Tire Pressure Monitoring System (TPMS) Initialization
  • Reset Battery Monitoring Sensor Learned Values
  • Local Interconnect Network (LIN) NEW Module Initialization
  • Factory Keyless Entry Code
  • Remote Keyless Entry (RKE) Keypad Programming

 

CCM: Cruise Control Module

  • New CCM Programming
  • CCM Configuration
  • Software Update
  • Cruise Control Radar Alignment

 

DDM: Driver Door Module 

  • Driver Door Control Module Programming
  • Driver Door Module Configuration

 

GWM: Gateway Module

  • Gateway Module (GWM) Programming 
  • Gateway Module A (GWM) Configuration 
  • Gateway Network Protection Unlock

 

HSWM: Heated Steering Wheel Module

  • Heated Steering Wheel Module Programming
  • Heated Steering Wheel Module Configuration

 

HVAC: Heating, Ventilation and Air Conditioning

  • HVAC Control Module Programming
  • HVAC Control Module Configuration
  • Reset the Outside Temperature Learned Values

 

IPMA: Image Processing Module A 

  • Image Processing Module A – Calibration
  • IMPA Coding
  • IMPA Software Update

 

IPMB: Image Processing Module B

  • Image Processing Module B – Coding

 

IPC: Instrument Panel Cluster

  • New Instrument Cluster (IPC) Programming
  • Instrument Panel Cluster Configuration

 

KEYS: LOST / SPARE KEY PROGRAMMING 

  • Lost Key Programming (Lost Key Lockout – Alarm is Active)
  • Lost Smart Key Programming (Lost Key Lockout – Alarm is Active)
  • Lost/Spare Key Programming
  • Lost /Spare Smart Key Programming
  • IMPA Coding
  • IMPA Software Update

 

PAM: Parking Assist Control Module

  • Parking Assist Control  Module Programming
  • Parking Assist Control Module Configuration
  • Tow Bar Configuration

 

PDM: Passenger Door Module

  • Passenger Door Module Programming
  • Passenger Door Module Configuration

 

PSCM: Power Steering Control Module

  • Power Steering Control Module Programming
  • Module Configuration
  • Electronic Steering Lock Programming

 

RCM: Restraints Control Module (Airbag Module)

  • New Module Programming
  • RCM Configuration
  • Clear RCM Crash Data

 

RGTM: Rear Gate Trunk Module

  • Rear Gate Trunk Module Programming
  • Module Configuration

 

RTM: Radio Transceiver Module

  • Radio Transceiver Module Programming
  • Module Configuration

 

SCCM: Steering Column Control Module

  • Steering Column Control Module Programming
  • Steering Column Control Module Configuration

 

SODL: Side Obstacle Detection Control Module LH 

  • SODL Module Programming
  • Module Configuration
  • Towbar Configuration

 

SODH: Side Obstacle Detection Control Module RH 

  • SODR Module Programming
  • Module Configuration
  • Towbar Configuration

  • Clear DTC Code(s)
  • Diagnostic Investigation Work (30 Mins Max)
  • Lost/Spare Key Programming
  • Lost/Spare Smart Key Programming
  • Oil & Service Indicator Reset

  • ABS Sensor Calibration
  • Additive Tank Coding
  • Airbag Control Module Programming
  • Align Immobilizer in PCM/IPC (Keyed Ignition)
  • Align Immobilizer in PCM/SSU (Smart Key)
  • Auto Levelling Sensor Calibration
  • BCM Software Update
  • Brake Fluid Reset
  • Clear Crash Data in RCM
  • Clear DTC Code(s)
  • Diagnostic Investigation Work (30 Mins Max)
  • DSC Module Software Update
  • Electronic Power Steering Module Coding
  • Electronic Steering Lock Programming
  • GEM Unit Configuration
  • Immobilizer Initialization in Used PCM
  • Lost/Spare Key Programming
  • Lost/Spare Smart Key Programming
  • New PCM Programming
  • PCM Software Update
  • SCR Module Programming
  • SCR Module Software Update
  • Spare Smart Key Programming
  • SSU Module Coding (Start Stop/Steering Lock)
  • Steering Angle Sensor Adaptation
  • Throttle Body Adaptation
  • Used PCM Programming

  • ABS Module Coding
  • ABS Software Update
  • Air Suspension Calibration
  • Air Suspension Module Programming
  • Airbag Control Module Programming
  • Airbag Crash Sensor Coding
  • Aircon Control Unit Programming
  • Airflow Meter Initialization
  • Alarm Trigger Reset
  • Audio Head Unit Programming
  • Automatic Locking Configuration
  • Battery Management System Coding
  • Battery Management System Software Update
  • Blind Spot Module Coding
  • Central Screen Programming
  • Centre Seat Configuration
  • Clear Crash Data Causing Non-Start
  • Clear Crash Data in Airbag Module
  • Clear Crash Data in Easy Start
  • Clear Crash Data in Electric Drive Module
  • Clear Crash Data in Radar Module
  • Clear Crash Data in Telematics Module
  • Clear DTC Code(s)
  • Coolant System Purge
  • DC/DC Converter Module Coding
  • De-energize Electrical System for Safety
  • Diagnostic Investigation Work (30 Mins Max)
  • Door Control Module Programming
  • ECM Coding
  • ECM Software Update
  • Engine Sound Control Unit Programming
  • Front SAM Programming
  • Front Seat Heater Coding
  • Gateway Module Coding
  • Gearbox Module Coding
  • Gearbox Module Update
  • Gas Particulate Filter (GPF) Re-Generation
  • Headlight Module Configuration
  • Infotainment System Software Update
  • Injector Programming (A-Class, C-Class & Sprinter ONLY)
  • Intelligent Servo Module (ISM) Programming
  • Lost Key Programming (Some Models up to 2015)
  • Spare Key Programming (Some Models up to 2015)
  • Navigation Data Update
  • New Air Mass Meter Reset
  • New ECM Programming
  • New Electric Fuel Pump Module Coding
  • New Instrument Cluster Programming
  • New Mass Air Flow Sensor Adaptation
  • Oil & Service Indicator Reset
  • Oxygen Sensor Initialization
  • Parking Brake Coding After Brake Pad Change
  • Parking Brake Module Programming
  • Parking Sensor Module Coding
  • Parktronic Module Coding
  • Passenger SAM Programming
  • Passenger Seat Module Programming
  • Pedestrian Protection System Reset
  • Power Electrics Module Configuration
  • Power Sunroof Control Module Coding
  • Powertrain Module Coding
  • Rain Sensor Coding
  • Rear SAM Programming
  • Rear Switching Module (HSM) Coding
  • Replacement Radio Coding (new)
  • Replacement Radio Coding (used)
  • Reset Coding in Power Steering
  • Rest DPF Learn Values
  • Reset Excessive Fuel Pressure Fault
  • Reset NOx Sensor
  • Reset SCR System after Non-Start Fault
  • Roof Centre Module Programming
  • SCR Diagnostics
  • SCR Module Programming
  • SCR Module Software Update
  • Seat Belt Tensioner Software Update
  • Seat Module Programming
  • Sensortronic Brake Module Counter Reset
  • Speed Limiter Configuration
  • Steering Column Electrics Programming
  • Tailgate Module Coding
  • Telematics Module Coding
  • Telematics Module Software Update
  • Throttle Valve Learning
  • Tow Bar Configuration
  • Tow Bar Configuration (OEM Registration)
  • TPMS Sensor Programming
  • Trunk Electronics Programming
  • Trunk LID Normalization
  • TV Tuner Module Programming
  • Upper Control Panel Module Coding
  • Used Gearbox Module Configuration
  • Used Instrument Cluster Coding
  • Varlo Roof Module Software Update
  • Video in Motion Programming
  • Weight Sensing System Module Configuration
  • Write Service History to DSB

  • ABS Module Coding
  • Adaptive Cruise Control Module Coding
  • Airbag Control Module Programming
  • Clear Crash Data in Airbag Module
  • Clear DTC Code(s)
  • Diagnostic Investigation (30 Mins Max)
  • Door Control Module Programming
  • DPF Replacement Adaptation
  • ECM Software Update
  • Emergency Call Module Programming
  • Front Radar Calibration
  • Gateway Module Coding
  • Gearbox Module Coding
  • Headlight Module Configuration
  • Immobilizer Align in Used ECM
  • Infotainment System Programming
  • Lane Assist Module Programming
  • Lost/Spare Key Programming
  • Lost/Spare SMART Key Programming
  • New Central Electrics Module (BCM) Coding
  • New Instrument Cluster Programming
  • New Key Set (Lockset) Programming
  • New Suspension Control Unit Programming
  • Parking Distance Control Module Configuration
  • Power Steering Module Configuration
  • Radio Code Retrieval
  • Steering Angle Sensor Adaptation
  • Steering Column Electrics Programming
  • SVM Activation of New NAV SD Card
  • Tow Bar Configuration (OEM Registration)
  • Turbo Actuator Reset

  • ABS Module Coding
  • Airbag Control Module Programming
  • BCM Configuration (after battery disconnected)
  • BCM Reset
  • New BCM Programming
  • Clear DTC Code(s)
  • Diagnostic Investigation Work (30 Mins Max)
  • ECM Software Update
  • ECM Programming
  • New Instrument Cluster Programming
  • New Hands Free Module (HFM) Programming
  • Electronic Power Steering Module Coding
  • Electronic Steering Lock Programming
  • Lost/Spare Key Programming
  • Lost/Spare Smart Key Programming
  • Parking Brake Module Programming
  • TCM Software Update
  • New TCM Programming
  • TPMS Activation for Coding
  • Towbar Configuration

  • Active Suspension Module Programming
  • Airbag Control Module Programming
  • Amplifier Module Programming
  • Brake Service Mode Adaptations
  • Clear DTC Code(s)
  • Component Protection Commissioning
  • Cruise Control Activation
  • Deactivate Production Mode
  • Diagnostic Investigation Work (30 Mins Max)
  • NEW DME Programming
  • Used DME Programming
  • Front Camera Module Coding
  • Front Radar Module Coding
  • Function Enabling
  • Gearbox Module Coding
  • Headlight Module Configuration
  • Immobilizer Commissioning
  • Infotainment System Programming
  • Instrument Cluster Programming
  • Lane Assist Module Calibration
  • Level Control Module Calibration
  • Lost/Spare Key Programming (Parts Must be ordered to VIN from
  • Dealer)
  • Lost / Spare Smart Key Programming (Parts Must be ordered to VIN
  • from Dealer)
  • New Front BCM Programming
  • New Rear BCM Programming
  • New Transfer Box Module Coding
  • PASM
  • PDCC
  • Parking Brake Module Programming
  • Parking Sensor Module Coding
  • PCC/PVTS Commissioning
  • PCC/PVTS – Teach Driver Cards
  • Power Steering Module Configuration
  • Rear Axle Steering Module Coding
  • Rear BCM Reconfiguration
  • Rear Camera Calibration
  • Rear Camera Module Coding
  • Rear Electrics Module Coding
  • Reset Crash Shut-off in Hybrid Module
  • Reset SCR System after Non-Start Fault
  • Service Indicator Reset
  • Steering Wheel Electronics Programming
  • Thermal Management Basic Settings
  • Transmission Electronics (PDK) Programming
  • Tire Pressure Monitoring System (TPMS) Programming
  • Tow Bar Configuration
  • Vehicle Handover
  • Vehicle Analysis Log (VAL)
  • Maintenance of Vehicle Data

  • ABS Calibration
  • ABS Module Coding
  • Airbag Control Module Programming
  • Align Immobilizer in NEW ECM (Virgin)
  • Clear DTC Codes(s)
  • Diagnostic Investigation Work (30 Mins Max)
  • ECM Software Update
  • Headlight Module Configuration
  • HVAC Module Programming
  • Power Steering Module Configuration
  • Lost/Spare Transponder Key Programming
  • Lost Smart Key Programming
  • New Immobilizer Module Coding (2 keys needed)
  • New Smart Module & ICU Coding
  • New Steering Column Electrics Calibration
  • Remote Control Programming
  • Service Indicator Reset
  • Spare Smart Key Programming
  • Smart ID Box Replacement (NEW)
  • ECU Programming
  • ECU and Control Module Software Update
  • TPMS Sensor Programming

  • Clear DTC Codes(s)
  • Diagnostic Investigation Work (30 Mins Max)
  • Lost/Spare Transponder Key Programming
  • Lost/Spare Smart Key Programming

  • ABS Calibration
  • ABS Module Coding
  • Airbag Control Module Programming
  • Align Immobilizer in NEW ECM (Virgin)
  • Clear DTC Codes(s)
  • Diagnostic Investigation Work (30 Mins Max)
  • ECM Software Update
  • Headlight Module Configuration
  • HVAC Module Programming
  • Power Steering Module Configuration
  • Lost/Spare Transponder Key Programming
  • Lost Smart Key Programming
  • New Immobilizer Module Coding (2 keys needed)
  • New Smart Module & ICU Coding
  • New Steering Column Electrics Calibration
  • Remote Control Programming
  • Service Indicator Reset
  • Spare Smart Key Programming
  • Smart ID Box Replacement (NEW)
  • ECU Programming
  • ECU and Control Module Software Update
  • TPMS Sensor Programming

  • ABS Module Coding
  • Adaptive Cruise Control Module Coding
  • Airbag Control Module Programming
  • Central Electrics Module Software Update
  • Clear Crash Data in Airbag Module
  • Clear DTC Code(s)
  • Climate Control Module Coding
  • Diagnostic Investigation (30 Mins Max)
  • Door Control Module Programming
  • DPF Replacement Adaptation
  • ECM Software Update
  • Emergency Call Module Programming
  • Front Radar Calibration
  • Gateway Module Coding (TCM)
  • Gearbox Module Coding (TCM)
  • Headlight Module Configuration
  • Immobilizer Align in Used ECM
  • Infotainment System Programming
  • Lane Assist Module Programming
  • Lost/Spare Key Programming
  • Lost/Spare SMART Key Programming
  • New Central Electrics Module (BCM) Coding
  • New BCM Programming
  • New Instrument Cluster Programming
  • New Key Set (Lockset) Programming
  • New Suspension Control Unit Programming
  • Parking Distance Control Module Configuration
  • Power Steering Module Configuration
  • Radio Code Retrieval
  • Steering Angle Sensor Adaptation
  • Steering Column Electrics Programming
  • SVM Activation of New NAV SD Card
  • TPMS Factory Reset
  • Vehicle Battery Coding

  • ABS Module (VDDM) Coding
  • Airbag Control Module Programming
  • Audio Amplifier Module (AAM) Coding
  • Audio Control Module (AUD) Coding
  • Battery Energy Control Module Programming
  • Brake Control Module Programming
  • Brake Service Mode Adaptation
  • Calibration of Wheel Speed Sensors
  • Clear Crash Data in Airbag Module
  • Clear Crash Data in CEM
  • Clear DTC Code(s)
  • Diagnostic Investigation (30 Mins Max)
  • Drivers Door Module (DDM) Programming
  • ECM Software Update
  • Electronic Steering Lock Programming
  • Exterior Sound Module (ESM) Coding
  • Transmission Module Coding
  • Headlight Module Configuration
  • Lost/Spare Key Programming
  • Lost/Spare Key Programming (including Remote)
  • Lost/Spare Smart Key Programming
  • New Central Electrics Module (CEM) Coding
  • Oil & Service Indicator Reset
  • Oil Level Sensor Calibration
  • Parking Aid Module Programming
  • Passenger Door Module (PDM) Programming
  • Passenger Protection Module Programming
  • Pedestrian Protection Module Programming
  • Reset CEM After Battery Failure
  • Reset TCM Adaptation and Oil Counters
  • SCR Diagnostics
  • Seat Belt Tensioner Module Configuration
  • Service Indicator Reset
  • Side Obstacle Detection System Programming
  • Steering Angle Sensor Module Coding
  • Steering Column Electrics Programming
  • Steering Wheel Module Programming
  • Tow Bar Configuration (OEM Registration)
  • Vision System Camera (ASDM) Module Programming
  • Wide Angle Vision Module Calibration
Your One Stop Shop for remote OEM Dealer Level Diagnostics, Programming, Coding and Advanced Driver Assistance Systems (ADAS)

WEBSITE PAGES

IMPORTANT LINKS

Our tools and devices are sold for Official Use only. It will be on each user’s responsibility in using them for any illegal reason

CORPORATE HEADQUARTERS

2300 Yonge Street, Suite 1600
Toronto, Ontario
Canada M4P 1T4
+1 (226) 499-0047

Monday – Friday
8.30am – 6.30pm ET

Copyright © 2024 Tech Diagnostics. All Rights Reserved